Avoid ceramic tile corners and at the intersection of ceramic tiles When measuring, if the punching position is at the corner of the ceramic tile, it is necessary to plan the installation position again to avoid the corner position of the ceramic tile. When applying tiles at the corners, less cement is used, resulting in less than 1/2 of the actual stress position of the plastic expansion screw. As the gravity of the object on the wall pulls downwards, it is easy to cause the object to fall off. Try to choose the center of the ceramic tile without any hollowing and drill down The correct operation method should be: Before drilling: Confirm whether the ceramic tiles at the drilling position are firmly pasted and whether they are hollow. When drilling: Try to choose the center of the tile without any hollowing out. If you need to drill in areas with voids, it is best to use a glass drill to slowly drill. The position where the hole is punched must be tightly adhered to the tiles. If the lower hole is located at the junction of multiple tiles or there is a cavity under the tiles, it is easy to break the drill bit or shatter the tiles during the drilling process.
If you want to know more about our products, please visit our website https://www.china-drill-bit.com. Hope to cooperate with you.
